Global Colour Labs · Request a physical sample print on your substrate Book a Demo · Download ICC Profiles · Sample Request

Why Your Brother Printer Keeps Breaking Down — Hint: It's Not the Printer

Constant Brother printer troubleshooting and resets usually point to a purchasing problem, not a hardware one. A 120-person office admin breaks down the real cost of buying on sticker price — and what actually fixed it.

Last month, someone from accounting messaged me for the third time in two weeks. The Brother printer on the second floor was showing an error again. She'd already tried the usual Brother printer troubleshooting steps — power cycling, checking the toner, clearing the queue. Nothing worked. I walked upstairs, held the power button down for about 10 seconds, and the thing reset and started working like nothing happened.

That was the fifth time this quarter I'd had to reset that Brother printer. And honestly? For the longest time, I thought we just got a lemon.

I'm the office administrator for a 120-person company. I manage all the printing, office supplies, and equipment ordering — roughly $45,000 annually across 8 vendors. I report to both operations and finance, which means I get it from both sides: "Why is the printer always broken?" from ops, and "Why did we spend $800 on printer stuff this month?" from finance.

The symptom everyone sees

If you've ever managed office printers, you know the cycle. The printer jams. Someone tries to fix it. They give up and call you. You run through the same Brother printer troubleshooting routine you've done a hundred times: power off, unplug for 30 seconds, hold the power button while plugging back in, release when the lights blink. Sometimes it works. Sometimes you have to do a full reset. Then it works again. For a while.

Here's the thing — I've gotten so good at knowing how to reset a Brother printer that I could probably do it blindfolded. That's not a skill I ever wanted to put on my resume.

The assumption — my assumption, and everyone else's — was that the printer itself was the problem. Maybe it was a bad model. Maybe Brother printers just aren't built like they used to be. Maybe we needed to replace it.

Never expected the answer to be something completely different. Turns out the printer wasn't broken at all. Our purchasing process was.

The problem behind the problem

Around Q2 last year, I started tracking every printer issue. Not just "the printer is broken again" but what actually happened, how long it took to fix, and — most importantly — what we were feeding the thing.

The pattern was pretty obvious once I looked at it. Every major issue — the jams, the print quality problems, the mysterious error codes that required a reset — happened within a week or two of when we changed the toner cartridge.

We'd been buying third-party toner for years. The math seemed obvious: Brother OEM toner runs about $80-90 per cartridge (based on Brother's listed retail pricing, early 2025 — actual prices vary by retailer and region). The compatible stuff was $25-40. For an office printing thousands of pages a month, that difference adds up fast. At the time, it looked like a no-brainer.

Here's the thing about causation, though. People think cheap supplies cause printer problems. Actually, I think it's more like: printers that get cheap supplies develop more problems, which makes people think the printer is the problem. The causation runs in a circle — and the printer gets blamed at every turn.

Honestly, I'm not sure I fully understand the technical reason why the third-party toner caused more issues. My best guess is that the formulation difference leads to more wear on the drum unit, which then leads to more frequent jams and error states. But I'm not a printer technician — I'm a purchasing person. What I do understand is the pattern in my spreadsheet.

What this actually costs

Let me put some numbers on it, because that's what ultimately got finance's attention.

Each printer incident — the report, the troubleshooting, the reset, the follow-up — typically took about 30 minutes of my time or someone else's. We averaged 4-5 incidents per month. That's roughly 25-30 hours per year just managing printer problems. At my salary level, that's around $1,200 in time alone. And that doesn't count the time employees spent waiting for the printer, or the reprints we had to do because of quality issues.

Then there's the hidden stuff. Emergency orders for toner when we ran out because the cheap stuff was going fast. The occasional replacement drum unit that failed early. And let's not forget the biggest cost — the credibility hit. When your VP can't print a document for a client meeting, that's not just an inconvenience. That's a "why can't you just fix this" conversation.

The surprise wasn't the price difference. It was how much the hidden costs added up. When I factored in my time, the reprints, the emergency orders, and the early drum replacements, the cheap toner was costing about 30% more than OEM would have. The $40 per cartridge savings disappeared entirely.

And it's not just printers. We bought an Entina 3D printer for rapid prototyping a couple years back. Went with the cheapest option that seemed adequate. Spent the next six months troubleshooting layer adhesion issues. Same story with our K1 Max 3D printer — cheaper build plate, replaced it twice in a year. We even managed to mess up our laser engraver purchase. The budget model we bought has a lens that slips out of focus constantly. I've probably searched "how to focus laser engraver" a dozen times this year alone, usually while standing in front of the machine, frustrated, at 4:30 on a Friday.

My experience is based on about 200 equipment orders across these vendors. If you're running a much larger operation with dedicated IT staff who can absorb the troubleshooting time, your calculus might look different. I can only speak to what I've seen in a mid-sized office that prints a lot.

What I changed

We moved back to OEM toner in Q4. Not because third-party is always bad — plenty of offices have fine experiences, and I'm not going to pretend it's universally wrong. But for our usage pattern, the math didn't work. Since switching, I've done exactly two resets in the past six months. Down from five a quarter.

We also built a simple TCO template. Every equipment order over $200 now gets scored on three things: purchase price, expected maintenance cost, and my time managing it. It's not perfect, but it forces the conversation beyond the sticker price.

And we started matching equipment to usage more carefully. That sounds obvious, but it wasn't something we did before. We had a home-office-grade printer in a high-traffic area. That's not the printer's fault — that's ours.

Look, I'm not going to tell you that the cheapest option is always wrong. That's not true either. There are situations where a budget printer is perfectly adequate. But in my experience managing this stuff for five years, the lowest quote has cost us more in the long run more often than not. Not always. But more often than not.

The bottom line? If your Brother printer keeps requiring troubleshooting and resets, it might not be the printer. It might be what you're feeding it, how you're using it, or how you're buying it. The fix doesn't always mean spending more money — but it usually means spending more thought.

Farah Rahman
Farah Rahman

Farah Rahman is an arc-welding and plasma-cutting equipment analyst covering MIG, TIG, MMA or stick welders, multiprocess power sources, wire feeders, torches, and plasma cutters. She uses IEC 60974-1 safety and performance requirements while examining output range, duty cycle, open-circuit voltage, arc stability, wire-feed speed, gas flow, travel speed, cut capacity, power factor, cooling, and environmental rating. Her comparisons help fabrication shops, maintenance teams, and buyers match process, material thickness, joint quality, portability, electrical service, consumables, and production tempo.